Tankinetics Composite Products
Innovations
and ASME Accreditation
Tankinetics was the world’s first FRP Composites company accredited by
ASME to engineer and build custom FRP pressure vessels to meet state laws as
required. ASME Section X Class II vessels are available to 16 feet in diameter
at pressures up to 250 PSIG. The vessels are built to precise standards and AE
tested as proof of design before they can be ASME Code Stamped. |
ASME Section X Class II
|
|
|
|
ASME Section X Class 2
Code
Stamped Pressure Vessels 145 PSIG ready for shipment
from Tankinetics. |
ASME Section X Class 2 Code
Stamped Pressure Vessels 145 PSIG at customer's site.
|
ASME
RTP-1
|
Tankinetics is also accredited by
ASME to engineer and build ASME RTP-1 Stamped vessels.
RTP-1 is a Quality Assurance/Quality Control process
that includes laminator testing and certifications for
vessels operating in corrosive service up to and including
+/- 15 PSIG. Large diameter ring oblated vessels can
be ASME RTP-1 Stamped.
|
|
|
11' X 45' Fiberbed Mist
Eliminator. Designed and
tested 15 PSI
and Full Vacuum. ASME RTP-1
Stamped. |
Tankinetics Specialized Manufacturing
Tankinetics’ Ring
Oblation System
Tankinetics pioneered the innovative modular shipping
and field erection concept called Tankinetics’ Ring
Oblation System.
This technology facilitates shipping
and erecting Tankinetics’ large diameter cylindrical
composite tanks.
Oblation enables our large shop fabricated
tanks (up to 60 feet in diameter) to be oblated according
to precise mathematical formulas, nested together,
and shipped to the erection site. There, the tank is
de-nested, de-oblated, and the sections are bonded
together. |
Oblation
|
| This system
results in lower costs, better quality, and faster
field erection. Tankinetics originally patented this
system. Our more than 30 years of experience in oblation
technology is unmatched by any other company in the
composites industry. |
Shop-fabricated tanks (left) are
oblated and nested (right) for unitized shipment.
|
Field Construction
Tankinetics designs and builds large diameter cylinders on
the customer’s site in a temporary controlled plant.
This allows the customer to gain economies on multi-vessel
orders or for tall structures such as Stack Liners to minimize
field joints.
Shipping
|
De-oblation
|
Erecting and assembly at the customer's site. |
|
|
Assembly of 50' x 40' ring
oblated
tanks
for HCL Storage.
|
Close up of assembly of 50' x 40'
ring
oblated tanks for HCL Storage.
|
Pipe, Duct & Stacks
|
|
13' X 6" diameter utility
outlet ductwork.
|
|
|
6'
0" Duct, Wye and
Square to Round Transition for Sulfurous Gas Cleaning.
|
|
|
|
|
| Laminate# |
1 |
2 |
| Cycles |
1000 |
60,000 |
| Initial weight, g |
70.3566 |
94.1397 |
| Final weight, g |
70.0661 |
93.8918 |
| Weight loss, g |
0.2905 |
0.2479 |
| Weight loss, % |
0.41 |
0.26 |
|
|
|
